DIY anything sounds so good and looks like it would save you lot of money, doesn’t it? In case of general mold that is present in a small amount, DIY mold removal is ideal. However, in case of severe mold it is quite not the right solution.
Let’s see how and when you can use DIY mold removal techniques:
When you have a less than 10 sq.ft big mold that is non-toxic kind, you can proceed to take care of it on your own. Soap, elbow grease and water can help you get rid of regular non-toxic mold that isn’t yet spread wide enough. If the mold is stubborn, make a solution of 1:9 bleach to water and spray it in the mold area to wipe after a while.
But, this can be a tedious sport. You’d sure have better things to do than go looking for spores and moisture issues and trying to fix it all. Therefore, prevention is needed. Condensation can foster mold growth, so always open a window or run your bathroom fan after hot shower. Make sure to dry tiles surrounding the used sink including the sink itself after washing dishes or using water. Your basement is one of the most mold prone areas in your household, so remember to periodically dry and clean them. Here are some of the major causes of mold in household:
Bathrooms that have poor ventilation, tile grout lines and shower ceilings especially.
Mudroom sinks and kitchen area
Thresholds of exterior doors
Sump pumps and basement near hot water heaters
Professional mold removal services
When you have mold larger than 10 sq. ft, you need a professionals to handle it. Black mold is one of the most commonly toxic mold in household. How to tell if you can get rid of mold yourself or need a professional? It’s not that hard!
Mold is not something pleasant or something you want to foster in your home. The image of reproducing spores on walls, counters and wood trim makes you cringe. But, that’s not all. Mold can actually be very harmful to you health as well, and not just because of allergies, it causes chronic lung issues overtime as well. And when the mold is a big one, you have musty smell and unpleasant air in your home, you need professional mold removal services!
You can either hire specialists or a mold removal company to take care of mold. When you hire a mold remediation services from a company you have more exerts that can solve your mold problem, you also get better quality of work and immediate remediation services, that usually takes a team to perform. In case of severe mold infestation, hiring remediation services from a company rather than a specialist comes quite beneficial.
However, certain states compulsorily require hiring of different company/specialist for inspection and different for remediation, in some, it is your choice. Make sure you are hiring certified, insured and credible professional mold removal services above anything else.
How to remove a mold infestation from your NYC home
Dealing with a mold infestation can be a frustrating, time consuming, stressful, and costly job. Having mold in your home can spell disaster for you and the other people who live in your home. In order to get things back on track in terms of indoor air quality, while making sure your home a sustainable place to live again, you should seek the assistance of a professional NYC mold inspection company.
Mold inspection basics
Mold can be defined as a type of an airborne fungus. It settles down on damp or wet surfaces that can be found in interior or exterior of your home. Mold has the potential to cause a wide array of health issues for the people who live inside. They include confusion, dizziness, eye irritation, emphysema, fatigue, sinus problems, asthma, headaches, allergies, dermatitis, neurological disorders, internal organ malfunctions, and even contributing to death when chronically exposed to the toxins and VOC’s created by mold. Many people think that mold can build up only in their bathrooms. From the recent studies, it has been identified that almost all the areas of your home are vulnerable to growth of mold. Basement, attics and kitchen hold a prominent place for mold growth.
Spores, which allows mold to reproduce, are also toxic when the growth, compound that with other air pollutants, and things can spiral out of control extremely fast. You will have to suffer from serious respiratory illnesses. The nature of spores play a major role behind the type of illnesses that you will have to suffer. For instance, breathing black mold spores can lead you towards extreme health conditions such as emphysema and asthma. Other molds only release their spores at certain times of the day which can sometimes lead to an incomplete mold inspection when taking air samples alone.Therefore, you should never take the mold testing process simple as disturbing mold will release spores.. Spores will then be released into the air, flowing through your HVAC into other parts of your house as well as attaching themselves to you and your clothing. Mold spores can safely and confidently be detected and collected for NYC mold testing with a professional mold inspection service.
Almost all the areas of your home are vulnerable to growth of mold. Ceiling tiles, baseboards, wood, wallpaper, carpet, vinyl, different types of wall board, basically any type of organic material it can feed on. It is better if you can keep an eye on leaks and areas where moisture accumulates in and around your home as mold can build up in those areas within a very short period of time. This will assist you to limit the exposure of your family members to these toxins and stay away from the harmful symptoms and side effects.
The importance of mold inspection in NYC
Mold inspection Brooklyn is associated with a wide range of benefits as well as advantages. In fact, the people who live in NYC, Brooklyn and Staten Island should pay special attention towards this. Annual mold inspections in Staten Island will definitely help you to save a huge amount of money in the long run while staying away from hassle as it is constantly moist in this particular area.
Mold grows in areas that have a higher amount of moisture. Therefore, it is very common to find mold appearing in your bathroom or basement. However, these two are not the only places that mold can appear. Mold can even appear in places that cannot be examined with naked eye. As a result, it is better if you can get the help of professional New York City mold inspection services and make sure that your home is safe as they utilize high tech mold detection equipment and comprehensive documentation with all of their NYC mold inspection reports.
As mentioned earlier, preventative measures such as annual mold inspections(where applicable), mold testing, and mold removal has the ability to help you save thousands of dollars. Yes, it is true that you will have to spend money on New York City mold removal services. But when you compare the long term expenses, you will figure out that it is worth it to go for New York City mold remediation. If you don’t pay your attention towards black mold removal in NYC, things will get worse with time and you will have to end up with quite possibly a complete home restoration. Why you should seek the help of a professional New York City mold inspection and/or a NYC mold removal service?
A clear difference can be observed is mold removal and mold remediation. Remediation is the process of removing mold growth and cleaning mold from all the surfaces in a building. Remediation involves a technical process and it will isolate and remove the materials that contain mold. Since mold remediation is a hazardous and technical process, it is a must to seek the help of a NYC mold removal expert. They will use their knowledge, technology, and experience to think about the smartest and the safest path to follow.
Mold remediation is recognized as a dangerous work. During the mold removal process, it will get contaminated with other walls on the building and it will start to grow. The specialists are equipped with necessary tools such as HEPA filters, fumagation technologies, and high pressure negative air flow systems in order to keep the mold from spreading. You will not be able to use this equipment and remove mold in a safe way on your own. Five Boro Mold Specialist’s NYC mold experts will employ fungicides among several other mold remediation chemicals to improve the effect of the mold removal along with inhibiting future mold growth. Carbon dioxide and dry ice cleaning technologies employ tiny pellets of frozen carbon dioxide that are sprayed onto the moldy surfaces at a high pressure. It is an effective method of mold removal and you can gain measurable results within a short period time.
Five Boro Mold Specialist’s NYC mold removal services will help to restore and quite possibly increase the quality of air inside your home. Therefore, seeking their help can be considered as a great way to protect your investment. Our professional mold decontamination service will keep your home mold free and keep everyone from getting sick from the toxic spores and VOC’s that float in the air and are unseen by the naked eye.
Prevention and education is the best way rather than experiencing the hassle involved with mold remediation. Our NYC mold experts will give you the run down with our mold remediation services, consulting with you to pass along the necessary knowledge to prevent future mold from growing. For example, plumbing leaks, leaky roofs, poor ventilation in bathrooms, and exterior drainage are the main factors that can contribute to the growth of mold. Our specialists will examine your home and let you know the things that you should pay extra attention to as to prevent any recurrence of mold in the near future.
New York City Mold Inspection Services- Brooklyn, Bronx, Queens, Manhattan, Staten Island, Long Island, Hamptons
Are you looking for the best mold inspection and removal company in NYC? Then you can think of seeking the help of Five Boro Mold Specialists. They have maintained an excellent reputation throughout the past few years by helping people to get rid of mold with minimum hassle. Go ahead and visit their website to get more information about the services.
Schedule a NYC Mold Inspection With Five Boro Mold Specialist Today!
Mold is a type of organism that thrives in dark and damp areas, reproducing by releasing mold spores into the air. All that is needed for mold to develop is moisture, humidity, and organic matter. There are literally thousands of types and variations of mold, some toxic and some non toxic.
Do you know which types of mold are lurking about in your home?
The 3 Main Types of Mold
Allergenic, Pathogenic, Toxic
There are a large number of places where mold can grow and thrive in your home or building. Mold in any home or structure can prove to be
extremely hazardous to you and your loved ones health, as well as damaging on your wallet if not dealt with in a timely manner. Mold is very dangerous as it typically makes people develop a wide range of health illnesses. Some of these illnesses include: respiratory infections, rashes and skin irritations, severe allergies, eye problems, severe illness, and even contributing indirectly as well as directly to death.
Therefore, preventing mold growth is very crucial. However, for you to prevent mold from growing, you must know the most common places
where mold may be found.
Some of the more common places mold is found in your home include the following:
Mold growing in the bathroom- Mold thrives in high humidity, dark environments which are constantly exposed to moisture. The bathroom is a perfect place where mold can grow since it is where you brush your teeth, take showers and baths, wash your hands, along with many other actions that require water or that create humidity. You should routinely check the edges of shower curtains, the corner of the bathtubs, the sides of the faucets, underneath cabinets You should also check at your bathroom rugs are routinely cleaned if you have them. Poor ventilation in bathrooms is another major factor that inhibits a prime breeding ground for mold growth.
Mold In Kitchens- Mold Around The Sink, Refrigerator, Deep freezer, and Dishwasher
Inside, underneath, and behind kitchen appliances and cabinets are another prime breeding ground for mold to grow as most of these places are dark and moist. You can prevent mold from growing in these places by ensuring that there is no standing water in the pan of the refrigerator, making sure that your water lines and drainage lines are not leaking, routinely cleaning underneath and behind kitchen appliances, and keeping your refrigerator clean and maintained.
Mold in basements, cellars, and Crawlspaces-This place is very good in breeding the house mold. This is because there is only a little or no sunlight at all. The place is also not ventilated well and there is high humidity. You can prevent mold from growing here by repairing all the leaking pipes and make the basement floors and walls waterproof.
Mold in Attics- Attics with poor ventilation are often one common place you will find mold. Lack of attic vents, roof vents, and/or attic ventilation fans are prime places for mold to flourish. If you have had a leaky roof or extremely wet weather for a long period of time, obviously the moisture will contribute to starting a mold infestation.
Mold in HVAC systems, Air conditioning units, and furnaces- The heat from machines or furnaces of the HVAC units may lead to growth of house mold. This is especially true if there is water near your HVAC system, furnaces, oil tanks,etc Condensation occurs in areas with high cold or heat and it typically leads to mold growth. To prevent this, always clean and maintain your HVAC units, duct work, and other heating and cooling components frequently.
Other places where mold can grow include:
Crawlspaces, underneath the floorboards, under carpet and carpet padding, in closets, inside of walls, in drywall, etc. Mold can even be found growing in your car and the ventilation systems, scary! In conclusion, if you are worried about the air quality in and around your home, and/or have experienced one of the many causes that could lead to mold growing within your home or building, it would be a good idea to conduct a thorough mold inspection of these areas.
Just think about it, mold spores mixing with dust and other air pollutants swirling about in your home for you and your loved one’s to breath…very disturbing to say the least.
Obviously, education and taking preventative measures are the best routes to explore when it comes to preventing a potentially hazardous mold infestation. If you suspect that you have mold lurking in and around your home, please give Five Boro Mold Specialist a call to schedule a professional mold inspection service.
About Five Boro Mold Specialist-
Five Boro Mold Specialist has 25 years of experience within the NYC environmental industries. We specialize in mold remediation and water damage prevention for the entire NYC metro area. Our NYC mold removal company has been servicing homeowners, landlords, property management companies, renters and tenants, businesses, education facilities, municipal buildings, government facilities, and other institutional structures with complete mold eradication services.We use state of the art mold remediation equipment, specialized toxic personal protection gear, and EPA-registered mold removal and
prevention chemicals to rid your property of health-threatening toxic Mold. Our highly experienced staff are certified, professionally trained, and have been committed to providing all of our clients with impeccable and stress free mold removal services.
We also offer a signature 3 year satisfaction guarantee on all work performed by our NYC mold experts.
You can schedule a NYC mold inspection service with one of our mold removal experts to receive an in depth estimate and to learn more about mold inspection and mold removal process.
Five Boro Mold Specialist Welcome’s You to Our New Blog About Mold! Stand by as we continue to finish building and developing our new informative blog about mold.
Five Boro Mold Specialist Inc. will be covering many issues pertaining to: mold in the news, types of mold, NYC mold law, NYC mold guidelines, mold inspection, mold testing, mold removal, mold remediation, NYC mold litigation, NYC mold lawsuits, NYCHA mold updates, mold images, mold videos, mold prevention, health issues and mold, …
Five Boro Mold Specialist Inc.
We are locally owned and operated mold remediation company that has been serving the New York City area for over twenty five years. Do not risk you and your family’s health with a less established NYC mold removal company. If you are currently in need of NYC mold removal services, please contact us immediately for more information.
To Schedule a High Tech Mold Inspection, Please Call- 1-888-526-7691
A 25 year veteran New York City Mold remediation Company
NYC Mold Inspection, Mold Testing, and Mold Removal Services
Servicing: Brooklyn, Manhattan, Queens, Bronx, Staten Island, Long Island